ALL NEW EBMX X-9000 V3 Controller
Built from the ground up for serious riders and racers, the EBMX X-9000_V3 is more than just a controller its a complete performance ecosystem. With a re-engineered power stage, cutting-edge logic system, and a redesigned user interface, its the most advanced, rider-tuned controller on the market.
Whether youre dominating urban streets, carving trails, or hitting the racetrack, the X-9000_V3 deliversunmatched power, precision, and customization.
EBMX X-9000 V3 App and Display Walkthrough
Power Meets Control
- 50kW Output | 1000A Phase Current | 1600ABurst
- 30 120V Infineon MOSFETs for performance andreliability under extreme conditions
- Redesigned Multilayer PCB & CNC CopperBusbars for superior thermal control
- Water-Cooling Option for race-level endurance
- IP67 Rated & CNC Alloy Case Built to take thepunishment
- Max Battery Amps 700amp
Next Gen Logic
- Industry-Leading 68 IO Support Runsanything, from race bikes to full featured builds
- Custom EBMX VESC Firmware withField-Oriented Control (FOC) for silky smooththrottle control, enhanced motor control, andgreater efficiency
- Integrated IMU for Wheel Lift Assist Fullyprogrammable for launch control, anti-loop, orstunt mode
- Dual Hall Throttle Ready Two ADC inputs,increased throttle safety and reliability
Race-Ready, Rider Tuned
- 6 Fully Customizable Power Levels (Race +Street Modes)
- Graphical UI for Throttle Tuning, Regen Braking& EBMX E-Clutch
- Load & Go Battery Profiles Over 15plug-and-play setups
- Preloaded Motor Tunes 30+ motors supportedout of the box
- One-Touch Updates OTA firmware &compatibility expansion
Built for the Bikes You Ride
- SurRon Light Bee
- SurRon Ultra Bee
- Talaria MX3 / MX4/ MX5
- Talaria XXX
- E Ride Pro SS 2.0 (With V3 Battery Plug)
- E Ride Pro SS 3.0 (With Breaker)
- E Ride Pro SS 3.0 (Without Breaker)
- E Ride Pro SR
- ReRode R1
- QS138 Motors
- WILL NOT WORK WITH TALARIA XXX PRO, Coming Soon!
Colored Heatsinks available for purchase separately
*Please note all X-9000 sent from July 2025 will be Version 3. Colored v2 heatsinks are compatible with the V3 controllers. V2 Wiring harnesses are NOT compatible.
The current list of Motors that the X-9000 is compatible with is below:
- OEM SurRon Light Bee
- OEM SurRon Ultra Bee
- OEM Talaria Sting MX3
- OEM Talaria Sting R MX4
- OEM Talaria Sting MX5
- EBMX XLB-60
- EBMX XTA-60
- EBMX XUB-80
- KO RS SurRon
- KO F Spec SurRon
- KO F Spec Talaria
- QS138 90H
- QS138 70H
- OEM E Ride Pro SS 2.0
- OEM E Ride Pro SS 3.0
- OEM E Ride Pro SR
| EBMX X-9000-V3 SPECIFICATIONS |
|
| RATED POWER |
50kw (CONTINUOUS) |
| VOLTAGE |
120v |
| WORKING VOLTAGE RANGE |
48v 110v |
| PHASE |
1000A (continuous)
1600A (burst) |
| MOSFETS |
Infineon |
| CONTROL PROTOCAL |
Field Oriented Control (FOC) VESC |
| FEATURES |
Build in IMU for integrated wheel-lift control
Dual hall throttle ready
X-Series App compatible for custom tuning
Pre tuned for stock and aftermarket batteries
Tuned for 30+ motors
|
| FIRMWARE |
VESC based motor control and firmware modified by EBMX |
| OPERATING TEMPERATURE RANGE |
-25 to 80 Degrees Celsius |
| Kit Contents |
X-9000 Controller
Plug and Play Harness and Mount Kit
Air Cooled Heat Sink (Black)
SW102T Color Display
Thumb Throttle
Bluetooth Module
1-2 Harness
|
| WATERPROOFING |
IP67 |
| WARRANTY |
2 Years |
| HEAT SINK COLORS |
Black / Red / White / Blue |
Reviews
There are no reviews yet.