COMP Cams Camshaft Kit Dodge 5.7/6.1L HRT Stage 2

Cam Specifications

This cam package can add +79 HP! It offers the best average torque and power of any sub .600″ lift Gen III Hemi cam tested. Runs great from 2500-6500 RPM.

CK-Kit Includes: Cam #112-303-11, Pushrods #8720-16, Beehive Springs #26918-16, Steel Retainers #761-16, Locks #607-16, Spring Seats #4685-16, Valve Seals #516-16

Compatibility and Requirements

• Engine Family: Dodge 5.7L and 6.1L HEMI (2003+)
• RPM Operating Range: 1900-6700
• Estimated Horsepower Gain with Kit: 79
• Cam Type: Hydraulic Roller
• Camshaft Series: HRT
• Stage: 2
• Valve Springs Required: Yes
• Camshaft Material: Billet Steel
• California Proposition 65: WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

Camshaft Specifications

• Advertised Intake Duration: 273
• Advertised Exhaust Duration: 279
• Intake Duration at .050 Inch Lift: 220
• Exhaust Duration at .050 Inch Lift: 230
• Intake Valve Lift: 0.596
• Exhaust Valve Lift: 0.582
• Lobe Separation: 113
• Lifter Style: Hydraulic Roller

Fitment

Comp Cams Warranty

For information on Comp Cams warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.