Edelbrock Intake Manifold Ford Mustang

Edelbrock Performer 5.0 RPM II Intake Manifold

Edelbrock part #71233 Performer 5.0 RPM II intake manifold is designed for 1986-95 5.0L Mustang engines, offering significant gains in horsepower over existing designs in the 1500 to 6500 rpm range. It is ideally suited for street and strip applications.

The manifold features a V-shaped crossover with an increasing cross-sectional area, passing over to eight large tapered runners. A 70mm throttle body is recommended (75mm will require port matching). Engines from 1994-95 Mustangs require Throttle Body Adapter #38353 and Adapter Kit #8025. It may not fit with the stock hood of 1994-95 Mustangs; an aftermarket hood is recommended.

The manifold offers a durable black powder-coated finish for long-lasting protection and a distinctive look.

Specifications and Recommendations:

• Recommended intake gasket: Edelbrock #7220
• Air valve location is 0.30″ higher and 0.50″ forward from stock
• Port exit dimensions: 1.16″ x 2.0″
• Recommended cams: Ford SVO X-303 or Z-303
• Overall height: 11.13″
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076; DO NOT USE END SEALS GASKETS
• Hardened washers must be used with intake bolts to ensure proper torque and prevent galling of the aluminum

Installation instructions

Fitment

Edelbrock’s Warranty

For information on Edelbrock’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.